Trunk Lid for 2014 Mercedes-Benz SLS AMG
No.
Part # / Description / Price
Price
50
Rear Cover Screw 
Mercedes-Benz
Mercedes-Benz Description: With step. Reinforcement fastening. M6X16
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. At bracket. Support mount.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. At bracket. Support mount.
$6.80
$6.80
60
Securing Mercedes-Benz
Mercedes-Benz Description: M6. Holder to window frame. Left holder. Control unit mount. Left bracket. License plate mount. At handle. Audio/comand operating unit installation opening. Transmission oil lines to cooler module. Wheel arch cooler at right.
$8.20
$8.20
90
Spring Nut Mercedes-Benz
Mercedes-Benz Description: COVERING ON PARCEL SHELF
Diameter: 4,2mm
Thread code letter: ST. Left trim mount
Diameter: 4,2mm
Thread code letter: ST. PANELING TO B-PILLAR BOTTOM
Diameter: 4,2mm
Thread code letter: ST. To trim
Diameter: 4,2mm
Thread code letter: ST. Handles & locks, passenger side door.
Diameter: 4,2mm
Thread code letter: ST. Left trim mount
Diameter: 4,2mm
Thread code letter: ST. PANELING TO B-PILLAR BOTTOM
Diameter: 4,2mm
Thread code letter: ST. To trim
Diameter: 4,2mm
Thread code letter: ST. Handles & locks, passenger side door.
$10.96
$10.96
100
Tapping Screw Mercedes-Benz
Mercedes-Benz Description: CONSOLE LEFT. 4.8X13
Diameter: 4,8mm
Thread code letter: R. CONTROL UNIT BRACKET. 4.8X13
Diameter: 4,8mm
Thread code letter: R.
Diameter: 4,8mm
Thread code letter: R. CONTROL UNIT BRACKET. 4.8X13
Diameter: 4,8mm
Thread code letter: R.
$12.26
$12.26
120
Grip Handle Mount Bolt Mercedes-Benz
Mercedes-Benz Notes: ATTENTION: ORDER WASHER AS WELL
Description: Autonomous intelligent cruise control. M6X20
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Control valve to bracket. Outer, m6 x 20. Black. Primed. To 01/12/2020. Interior part mounting. Wiper motor to rear panel door.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Control valve to bracket. Outer, m6 x 20. Black. Primed. To 01/12/2020. Interior part mounting. Wiper motor to rear panel door.
$8.40
$8.40
130
Washer Mercedes-Benz
Mercedes-Benz Description: Additional blower to condenser. Bearing to fire wall. Cable rail to bracket. Cap to bracket. Front damping valve to spring load accumulator bracket. Guide jaw to glass pane. Ignition coil to abs hydraulic unit console. At bracket. Interior part mounting.
$2.93
$2.93
140
Screw Mercedes-Benz
Mercedes-Benz Description: Crash box. M6X20
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Hinge mount to body. Hinge to longitudinal member. Hinge to body, left and right.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Hinge mount to body. Hinge to longitudinal member. Hinge to body, left and right.
$6.93
$6.93
230
Buffer Mercedes-Benz
Mercedes-Benz Description: At engine hood. Engine hood stop. To trunk lid, left and right.
$13.99
$13.99
270
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Piping to holder. M6X20
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Rear section, soundproofing. Holder mount. Limit switch mount. Mounting, acceleration sensor.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Rear section, soundproofing. Holder mount. Limit switch mount. Mounting, acceleration sensor.
$4.73
$4.73
300
Stop Plug Mercedes-Benz
Mercedes-Benz Description: ON REAR-END DOOR, BOTTOM. 6.5mm
Inside diameter: 6,5mm
Outside diameter: 9mm.
Inside diameter: 6,5mm
Outside diameter: 9mm.
$11.60
$11.60
310
Adhesive Tape Precut Part Mercedes-Benz
Mercedes-Benz Notes: TO BE ADAPTED DURING ASSEMBLY
Description: 70x70 mm.
$8.80
$8.80
390
Bolt And Washer Assembly Mercedes-Benz
Mercedes-Benz Description: Rear valve unit. M6X12
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Fender to a-pillar bracket, left. Central muffler. Bass box fastening. Fender to left holder.
Diameter: 6mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Fender to a-pillar bracket, left. Central muffler. Bass box fastening. Fender to left holder.
$4.31
$4.31
410
$11.44
